TIPS FOR USING SILICONE VACUUM BAG FOR GLASS LAMINATING MACHINE
Vacuuming is very important for manufacturing laminated glass
successfully. If vacuuming is not good, the laminated glass may have
bubbles. So there are some tips for vacuuming in the laminating oven.
1-Put some wire net upon the vacuum hole
Sometimes, the silicone upside sheet may seal the vacuum hole and stop
the vacuuming, if we put some wire net or fabric upon the vacuum hole,
it will avoid the sealing situation.
2-Put some bar around the silicone bag
Sometimes, you can put some bars around the silicone bag to help
vacuuming, but note that the height of the bars should be equal to the
combination of the laminated glasses you are going to process.
3-Put big glass as a template
If you laminate small laminated glasses, you can put a big glass on
the silicone bag down side, then put the small pre-laminated glasses
on the big glass, which will help vacuuming and also can avoid the
small pre-laminated glass change shapes because of un-even pressure of
silicone bag.
All rights reserved by :UCOLIN SILICONE TECH
(1)-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy
Glass Laminating
(2)-Silicone Sheet for EVA Glass Laminating Machine
(3)-Silicone Bag for PVB Glass Laminating Auto-clave
(4)-Silicone Rubber Sheet for Solar Cell Module Laminating Machine
(5)-Contact Us: uc@ucolin.com / www.ucolin.com
umewe360@gmail.com/ umewe360@hotmail.com
