CNC Switchable Privacy Glass CLEANING
PROTECTION
Protect glass from breakage after installation by promptly installing
streamers of ribbons, suitably attached to the framing and held free
from the glass. Do not apply warning markings, streamers, ribbons, or
other items directly to the glass except as specifically directed by
the Architect.
Note: Windblown objects, welding sparks, or other material applied to
the glass surface during construction may cause irreversible damage.
CLEANING
Cleaning of the glass during the subsequent weathering period is
necessary. Abrasive cleaners should never be used, particularly when
the surface to be cleaned has a reflective coating. Clean the Panels
with a mild soap or very weak acid (vinegar) applied with a soft,
clean, grit-free cloth. The glass and framing should be rinsed
immediately with water and the excess should be squeezed away from the
glass, taking care not to
contact the glass with any metal parts. The framing should be wiped dry.
The liquid crystal privacy film is made up of electrically conductive
coatings, a polymer matrix and liquid crystals. This film has
electrical wiring to be connected to a transformer to supply power for
the "on" (clear state) mode.
CNC-INTERLAYER TECH:
[Product 1]CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
[Product 2]CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
[Product 3]CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
